APTIV film, for high-end electronics such as high-density flexible circuits, features high temperature performance, chemical wear and hydrolysis resistance, superior mechanical properties, barrier (permeation) and electrical properties. Is high purity, halogen free, and RoHs and FDA compliant. Provides flammability protection without use of flame retardants. Come in widths up to 1.5 meters and thicknesses ranging from six to 750 microns.
LNP Starflam compounds provide flammability performance while meeting the requirements of halogen-free parts. The X-Gen Z270 family of fiber-reinforced polyamides supports compliance with WEEE, RoHS, and other environmental requirements. Combines non-halogenated flame retardance and low smoke performance, and meets UV94 V-0 standards at low thicknesses, as well as IEC60335 requirements. Said to provide outstanding thermal performance with an RTI of 140 ºC and robust electrical properties with a CTI of 600 volts. The portfolio includes PA6, PA6.6, PA6.6/6 blends, and other polyamides such as PPA and PA12. Currently injection moldable.
ROCHESTER, N.Y. - EMA Design Automation released TimingDesigner 9.0 that features Design Kits with assembled diagrams and libraries for commonly used parts and interface protocol standards.
The TimingDesigner design kits are pre-assembled component timing diagrams complete with all specified libraries for speed and voltage ratings. The kits have all documented timing protocols associated with one or more design components. According to EMA they are intended to give designers a quick start for timing analysis of their designs.
TimingDesigner is proposed to aid high-speed, multi-frequency designs by accurately modeling and analyzing the signal relationships between devices on a board or between embedded functions on an ASIC or FPGA. According to EMA it can evaluate comprehensive sets of timing alternatives and provide direction to the most complex of timing challenges.
TimingDesigner 9.0 will be available July 1, 2007.
SANTA CLARA, CA – Agilent Technologies Inc. announced the integration of its full-wave 3D simulator Electromagnetic Design System (EMDS) into the company's Advanced Design System (ADS) EDA software platform. The EMDS-for-ADS reportedly speeds up the design and verification process by reducing the steps necessary for accurate design of high-frequency RF/microwave modules, RF boards and planar antennas.
"Designers lose a lot of time translating a layout structure into another drawing environment, redefining the layer stacks and dielectric properties, assigning port numbers and reconnecting an S-parameter black box for co-simulation with active elements," said Bart Van Hecke, product manager with Agilent's EEsof EDA division. "Integrating our fullwave 3D EM simulator with the ADS circuit and system design environment eliminates the need for layout translation. It provides a 3D EM layout previewer that allows designers to check for drawing parameterization or errors before launching full-wave 3D EM simulations or optimization from the ADS circuit design environment."
At a price comparable to that of typical circuit simulators, EMDS-for-ADS makes full 3D EM simulation accessible to the entire ADS community of users, rather than just serve as a tool for EM experts.
The Agilent EMDS-for-ADS can also be used standalone as a fullwave 3D EM software platform, with its own complete 3D drawing and visualization environment for non-planar structures such as connectors, packages, machined parts and antennas.
SEATTLE – Simberian Inc. has released SimbeorT 2007, which includes three new feature updates: two-sided metal surface roughness analysis, models for trapezoidal strips and the release of a multi-user network licensing version of SimbeorT software. Metal surface roughness can significantly degrade signals in interconnects and SimbeorT provides unique capabilities to model it.
SimbeorT 2007 runs on any computer with Windows 2000/XP or compatible OS, single, dual-core or quad-core processors, and a 3D video card. To ensure customers' success, Simberian offers free online webinars and training classes, technical product support. Software updates are also included with the annual license of SimbeorT 2007.
MONTREAL, Ontario, Canada – Cimmetry Systems has released its Integration Software Development Kit (SDK). The Integration SDK provides AutoVue end users and Cimmetry ISV partners with a comprehensive framework to integrate AutoVue viewing and collaboration capabilities, respectively, into any internally developed or commercial document management (DMS), product lifecycle management (PLM) and enterprise resource planning (ERP) system.
Cimmetry's Integration SDK is said to deliver end users with the tools and documentation necessary for corporate developers to add AutoVue's multi-format, native document viewing, markup and collaboration capabilities to the DMS/PLM/ERP systems they have developed, allowing users to promptly access, view and comment on documents wherever they reside. By doing so, Cimmetry reportedly provides organizations with an easy and flexible way to complement the content management capabilities of their in-house systems, and improve existing document review and collaborative processes.
The Integration SDK also allows ISV partners to develop and market integrations of AutoVue with other product offerings, strengthening the capabilities of these systems.
